At a glance

Dose
15 g coffee per 250 g water for one mug (about 1:16.7)
Water
92–94 °C, poured from a kettle about 30 seconds off the boil
Grind
Medium — around the texture of table salt, in the 600–1,200 µm band
Bloom
2–3× the coffee's weight in water, then 30–45 seconds
Total time
2:30–3:00 from first pour to last drop
Yield
About 220 g in the cup; the grounds keep roughly twice their weight in water

Start with the two numbers everyone quotes. The Specialty Coffee Association's standard for home brewers specifies a brew ratio of 55 g of coffee per 1,000 g of water — 55 grams per litre, which is 1:18.2 — and a brewing temperature of 90–96 °C. Hario's own instruction leaflet for the V60 asks for 10–12 g of coffee per 120 mL serving. Those are not the same drink. At 12 g to 120 mL, Hario is prescribing roughly 83–100 g of coffee per litre.

Both are correct. They are describing different things, and the difference is the most useful thing to understand before you change a single setting.

What the SCA standard actually specifies

SCA Standard 310-2021 (Home Coffee Brewers: Specifications and Test Methods) is a testing document for filter machines, and it fixes the parameters so that machines can be compared. The ones worth knowing:

  • Standard brew ratio: 55 g coffee per 1,000 g water, measured as grams of coffee per kilogram of water at 17 ± 3 °C.
  • Target brew strength: 1.15–1.55% total dissolved solids at that ratio.
  • Brewing temperature: the slurry must reach 90–96 °C by the time a third of the water has landed, and stay in that band for the rest of the brew.
  • Grind: at least 65% of the particles between 589 µm and 1,168 µm — a medium grind, in ordinary language.
  • Water: odour-free, chlorine-free, calcium hardness equivalent to 50–175 ppm CaCO₃, alkalinity 40–70 ppm CaCO₃, pH 6–8.

The older certification language is more specific about the target: a brew strength of 1.15–1.45% resulting from an extraction of 18–22% of the coffee's mass. That window is the "Golden Cup" zone on the Brewing Control Chart, and it is still the clearest way to describe a balanced cup: enough solubles pulled out of the grounds, at a concentration strong enough to taste like something.

Read the ratio and the strength together and you see the logic. 55 g/L is not a taste preference, it is the ratio at which the strength and extraction targets are reachable with a normal grind and a normal contact time. Change the ratio and both targets move.

Why Hario's leaflet asks for a much stronger cup

Three things explain the apparent contradiction.

One: brewed coffee is not poured water. Ground coffee holds on to water — roughly twice its own weight, as a working rule. A 12 g dose keeps about 24 g of the water you pour, so 120 g in the cup needs something like 145 g poured. That already pulls Hario's 12 g/120 mL up from 100 g/L to about 83 g/L poured. Still strong by SCA's measure, but less extreme.

Two: the traditions differ. Japanese drip coffee is built around a small, intense cup served alongside a concentrated idea of what coffee is — a 120 mL serving is a kissaten portion, not an American mug. The SCA figure comes out of a filter-machine testing programme aimed at a larger brew and a broad middle of taste.

Three: 55 g/L is a starting point, not a rule. Few specialty cafés brew at 1:18 for a V60. A common service ratio is 60–66 g/L — 1:15 to 1:16.7 — which is stronger than the standard and weaker than the leaflet. Hario's own current UK guidance sits there: 15 g to 250 g, or 1:16.7.

The practical reading: treat 1:18 as the weak end of normal and 1:12 as the strong end, and put your own cup at 1:15–1:17. If a bag of coffee tastes thin at 1:16, adding coffee is a faster fix than grinding finer, because it raises strength without changing extraction.

The four variables, and the order to change them

VariableWhat it changesMove it when
Ratio (dose)Strength — concentration — with extraction roughly unchangedThe cup tastes weak or watery but not sour; or it is too intense but balanced
GrindExtraction — how much is dissolved out — and drawdown timeSour and thin (finer), or bitter and drying (coarser)
TemperatureExtraction speed, and which compounds come out at allLight roasts taste flat at 92 °C; dark roasts turn ashy at 96 °C
Agitation and pourEvenness — whether all the grounds see the same waterThe bed has channels, or the drawdown stalls halfway

Change one at a time and keep the rest fixed, or you learn nothing. The order that wastes least coffee is ratio first (it is arithmetic), then grind (the biggest extraction lever), then temperature, then pour technique.

A working recipe

These are Hario's published figures for the V60, with the timings laid out as a sequence. It makes one 250 g brew, about 220 g in the cup.

  1. 00:00 · setup Rinse the filter, heat the vessel

    Fold the paper along its seam, seat it, and run hot water through it. Tip the water out. This removes the papery taste and warms the dripper so the first pour is not cooled by cold ceramic.

  2. 00:00 · dose 15 g, medium grind

    Level the bed with a gentle shake. Put the whole thing on the scale and tare to zero.

  3. 00:00–00:10 · bloom Pour 45 g, then wait

    Start the timer, pour 45 g in a spiral from the centre, stop short of the paper. Wait 30–45 seconds while it rises and falls.

  4. 00:45 · first pour Pour to 150 g

    Slow circles, keeping the stream off the filter wall — water that runs down the paper bypasses the coffee entirely.

  5. 01:15 · second pour Pour to 250 g

    Let the bed drop a little between pours. A gentle swirl of the dripper at the end levels the bed and improves evenness.

  6. 02:30–03:00 · finish Drawdown complete

    If it finishes much earlier, the grind is too coarse; much later, too fine. Note the time and the taste, and change one thing next time.

Ratios at cup size

Grams of water for a given dose, across the useful range. Use poured water, and expect the cup to hold about 0.85–0.9 of it.

Dose1:151:161:171:18 (SCA)
12 g180 g192 g204 g216 g
15 g225 g240 g255 g270 g
18 g270 g288 g306 g324 g
20 g300 g320 g340 g360 g
30 g450 g480 g510 g540 g

Note what happens at 30 g: a two-cup brew at 1:16 wants 480 g of water, which is more than most 500 mL servers will hold once the grounds are in. Doubling the dose does not double the brewer's capacity — it halves the headroom.

When the cup is wrong

TasteMost likely causeFirst change
Sour, thin, finishes fastUnder-extracted: too coarse, too cool, or too shortGrind finer, in small steps
Bitter, drying, hollow middleOver-extracted: too fine, too hot, or too much agitationGrind coarser, then lower the temperature
Weak but bitterToo little coffee and too much extraction — both at onceRaise the dose (1:18 → 1:16), then re-taste
Strong but sourConcentrated and under-extracted, often a very light roastHotter water or a finer grind; keep the dose
Drawdown stalls, bed muddyToo many fines, too fine a grind, or pouring too hardCoarser grind; pour more gently and lower
Inconsistent from cup to cupUneven bed, or a pour that wanders to the filter wallLevel the bed, keep the stream central, swirl once

Water is the variable people skip

Coffee is about 98% water, and the SCA's water standard is a real specification rather than a suggestion: 50–175 ppm calcium hardness, 40–70 ppm alkalinity, pH 6–8, no chlorine, no odour. Very soft water under-extracts and tastes flat; very hard water scales the kettle and mutes acidity; high alkalinity buffers the acids that make a light roast taste like fruit.

If your tap water is hard or heavily chlorinated, a simple carbon filter is usually enough to get into range. Distilled or fully de-mineralised water is the opposite error — it has no minerals for the coffee to work with, and the cup tastes hollow.

What it costs per cup

At $18 for a 250 g bag, a 15 g dose is about $1.08 of coffee; add a paper filter at roughly two cents. A café pour-over of the same size is typically $4–6, so the equipment pays for itself in a few months of daily brewing, and the recurring cost is the beans rather than the machine.

Which is the argument for spending on the grinder before anything else. A consistent medium grind is the difference between a recipe that works and one that produces a different cup every morning, and no pouring technique fixes an uneven grind.

Sources and checks

Checked 17 November 2026. Coffee prices vary by origin and roast; the cost figures use a $18 / 250 g bag as an example.